Quick answer: If the oven stays cold or never reaches temperature, the usual causes are a element, a thermostat or a fan motor. Work through the safe checks below in order; if the fault remains, it points to a component that Al Haram Electrical Appliances Repairs Shop can replace.
What usually causes this
- Not heating
- Not holding temperature
- A broken door or hinge
- A failed fan
- A faulty thermostat
How to fix it, step by step
- Switch the appliance off at the socket and give it a full minute before restarting. A surprising number of faults are a one-off controller glitch.
- Check the basics: power, water supply, taps, hoses and that the door or lid is closed and latched properly.
- Look for the obvious: a blocked filter, a kinked hose, a tripped breaker, or a load that is too large or unbalanced.
- Clean the parts you can safely reach, such as filters, seals and vents, then run a short test cycle.
- Note any error code on the display and write it down, as it tells the technician exactly where to look.
When to call a technician
If the safe checks above don’t solve it, stop there, especially with anything involving gas, electrical parts or the sealed system. Al Haram offers same-day oven repair across Abu Dhabi. Call or WhatsApp +971 50 699 7974 and we will diagnose it properly and fix it with genuine parts.
