Repair guide

Dishwasher Not Draining Water? 7 Easy Fixes

Practical fixes from Al‑Haram's Abu Dhabi technicians, and when to call a pro.

Dishwasher Not Draining Water? 7 Easy Fixes, Al Haram Electrical Appliances Repairs Shop, Abu Dhabi

Why your dishwasher is not draining: the usual causes

CauseHow to tellWhat fixes it
Blocked filterDirty water sits in the bottom of the tub. The round filter under the lower spray arm is coated in food and grease.Twist out the filter, wash it under the tap with a soft brush and refit it.
Kinked or clogged drain hoseThe machine was pushed back recently, or water drains very slowly. The hose runs under the sink cupboard.Straighten the hose. Disconnect and flush it if food has built up inside.
Blocked sink trap or connectionThe kitchen sink also drains slowly, or gurgles when the dishwasher drains.Run the sink tap and clear the trap. Clean the spigot where the dishwasher hose joins.
Something stuck in the drain pumpGrinding or rattling during draining. Broken glass, bones, seeds or labels jam the pump blade.Remove the small pump cover in the sump and lift the object out carefully.
Failed drain pumpFilter, hose and sink are clear, but the pump is silent or only hums.A technician tests the drain pump and replaces it if it has failed.
Cycle stopped earlyWater stays after a power cut or when the door was opened mid-cycle.Close the door and run a drain or cancel programme to pump the water out.

How to fix a dishwasher that won’t drain, step by step

  1. Switch off and unplug the dishwasher. If the plug is hard to reach, turn off its switch or circuit at the distribution board.
  2. Take out the bottom basket. Scoop the water into a bowl with a cup, then soak up the rest with a sponge or towel.
  3. Clean the filter. Twist the cylindrical filter in the floor of the tub anticlockwise and lift it out. Wash the fine mesh and the coarse filter under warm water with a soft brush.
  4. Check the sump and pump cover. Look into the hole under the filter. Many models have a small clip-on cover there. Wearing gloves, remove any glass, bone or seeds you find.
  5. Check the drain hose. Open the sink cupboard. Follow the hose from the dishwasher to the sink and remove any kinks or sharp bends.
  6. Test the sink trap. Run the kitchen tap for a minute. If the sink drains slowly, clear the trap first, because the dishwasher drains into it.
  7. Refit and run a drain. Lock the filter firmly back in place, plug in and run a short rinse or drain programme. Check whether the tub empties.

A little clear water under the filter is normal on many models. Standing water above the filter is not. If the machine also makes a grinding sound, see our guide on a dishwasher making a loud noise.

When to stop and call a technician

  • The pump hums or makes no sound with a clean filter and a clear hose.
  • Water has leaked onto the floor or into the cabinet below.
  • You notice a burning smell from under the machine.
  • A drain or pump error code returns after cleaning.
  • The breaker trips when the drain starts.

A failed drain pump is replaced from underneath, which means taking out the machine. Al Haram Electrical Appliances Repairs Shop repairs this at home across Abu Dhabi, usually the same day. Our experienced technicians carry common parts for dishwasher repair in Abu Dhabi. Call or WhatsApp +971 50 699 7974, daily from 8 AM to 10 PM.

Drain problems and Abu Dhabi kitchens

Rice is a daily food in many Abu Dhabi homes. Loose grains, small bones and seeds from dates and olives get past the filter if plates are not scraped. Grease from cooking also sets in the sink trap that the dishwasher shares.

Hard water adds to the problem. Limescale coats the filter mesh and narrows the drain hose over time. Using dishwasher salt and a machine cleaner now and then keeps the filter and the hose clearer.

How to stop it happening again

  • Scrape bones, rice and seeds into the bin before loading.
  • Clean the filter once a week if you run the dishwasher daily.
  • Do not pour cooking fat or oil down the kitchen sink.
  • Run a dishwasher cleaner through an empty hot cycle every month or two.

Related repair guides and services

Dishwasher not draining: your questions answered

Why does my dishwasher smell after not draining?
At Al Haram Electrical Appliances Repairs Shop, we find the smell comes from food and dirty water left standing in the tub and filter. Warm kitchens speed up the bacteria that cause it. Remove the water, clean the filter and sump, then run an empty hot cycle with a dishwasher cleaner to clear the odour.
Is it normal to have some water in the bottom of a dishwasher?
Al Haram Electrical Appliances Repairs Shop technicians explain that a small amount of clear water in the sump below the filter is normal on many models. It keeps the seals moist. Water above the filter, or dirty water at the end of a cycle, means the machine is not draining properly.
Should I repair or replace a dishwasher that won’t drain?
According to Al Haram Electrical Appliances Repairs Shop, a drain fault is usually worth repairing. Most cases are a blocked filter, hose or sink trap. A new drain pump is a common part on most brands. The price depends on the part needed, and our technician quotes it after diagnosing the fault at your home.
Can I get my dishwasher fixed today in Abu Dhabi?
Al Haram Electrical Appliances Repairs Shop repairs dishwashers at home across Abu Dhabi, usually the same day. Call or WhatsApp +971 50 699 7974 with your brand and what the machine is doing. We are open daily from 8 AM to 10 PM.
Still stuck? If these steps don't fix it, Al‑Haram offers same-day repair across Abu Dhabi. Call or WhatsApp +971 50 699 7974 and we'll take it from here.
Call nowWhatsApp