Why your washing machine is not spinning: the usual causes
| Cause | How to tell | What fixes it |
|---|---|---|
| Water not draining | Clothes come out soaking and water sits in the drum. The machine will not spin until the water is out. | Clean the pump filter at the bottom front and check the drain hose for kinks. |
| Unbalanced load | The drum tries to spin, rocks, then slows down again. Common with one heavy item, such as a bath mat or duvet. | Spread the clothes evenly, add a few towels to balance a single heavy item, then spin again. |
| Spin turned off or set too low | The display shows no spin or a very low speed. Some delicate and wool programmes spin only gently. | Choose a normal programme or set the spin speed back up, then run a spin cycle. |
| Worn or broken drive belt | On belt-driven machines, the motor runs but the drum does not turn, or you hear squealing. The drum turns very easily by hand. | A technician refits or replaces the rubber belt that links the motor to the drum. |
| Worn carbon brushes | The drum turns slowly or not at all, with sparking smells or crackling from the motor. Brushes are small carbon blocks that feed power to some motors. | A technician replaces both brushes as a pair. |
| Motor or control board fault | Everything else checks out, but the drum stays still or the machine shows a motor error code. | A technician tests the motor, its speed sensor and the control board, then repairs the failed part. |
How to fix a washing machine that won’t spin, step by step
- Unplug the machine. Turn off the water tap behind it. Do this before you open any flap or move the machine.
- Drain any water left in the drum. Use the emergency tube or the pump filter behind the small flap at the bottom front. Catch the water in a tray and clean the filter.
- Rearrange the load. Take out half of the wet clothes and spread the rest around the drum. Never spin one heavy item on its own.
- Check the programme. Make sure the spin is not set to zero and that no rinse-hold or no-spin option is selected.
- Check the machine is level. Place a spirit level on top. A machine that rocks can stop the spin to protect itself. Adjust the front feet until it sits firm.
- Turn the drum by hand. With the machine unplugged, rotate the drum slowly. It should turn smoothly and quietly. Grinding or heavy resistance points to worn bearings. On a belt-driven machine, a drum that keeps spinning with no drag can mean the belt has come off.
- Run a drain-and-spin programme. Plug in and run a spin on its own with a small, even load. Listen for the motor and watch whether the drum moves.
If water will not leave the drum, follow our guide on a washing machine not draining first. If the drum spins but the machine bangs and moves, read about a washing machine shaking.
When to stop and call a technician
- You smell burning or see sparks through the vents near the motor.
- The motor hums but the drum does not turn at all.
- You hear loud squealing or grinding when the drum tries to spin.
- The breaker trips when the spin starts.
- A motor or speed sensor error code keeps showing on the display.
Belts, brushes and motors sit inside the cabinet behind live parts. Al Haram Electrical Appliances Repairs Shop repairs this at home across Abu Dhabi, usually the same day. Our experienced technicians carry common parts for washing machine repair in Abu Dhabi. Call or WhatsApp +971 50 699 7974, daily from 8 AM to 10 PM.
Spin problems and Abu Dhabi conditions
Large families often wash heavy loads of towels, bedding and thick clothes every day. Heavy, wet loads go out of balance easily and put more strain on belts and brushes. Fine sand from beach trips also collects in the pump filter, and a slow drain is enough to stop the spin.
In many villas the machine stands in an outdoor service yard or on a roof. Heat and dust there dry out rubber belts and clog the motor vents. A machine in a hot space usually needs more frequent checks than one indoors.
How to stop it happening again
- Clean the pump filter about once a month.
- Wash bulky items with a few smaller pieces so the load stays balanced.
- Do not overload the drum. Leave a hand’s width of space at the top.
- Keep the machine level and check the feet after it has been moved.
Related repair guides and services
- Washing machine repair in Abu Dhabi
- Washing Machine Not Draining Water? 7 Quick Fixes
- Washing Machine Shaking and Moving? Here’s Why
- Why Does My Appliance Trip the Electricity? Causes and Fixes
- All appliance repair in Abu Dhabi
- More appliance troubleshooting guides
